Laserworld Ecoline Série Mode D'emploi page 7

Manual: Ecoline Series EL-200G KeyTEX
7.3 Modes
Access the four different operating modes available in this product by using the MODE button
on the front panel. Pressing and holding the MODE button for 2.5 seconds will turn the pro-
duct on or off. Press MODE to cycle through the modes. Please see a description of each mode
below.
Mode
Auto
Sound
Text
Time
7.4 IR remote controller
Cycles through auto programs
Pattern mode
Text mode
Numeric keys
Button Function / Button
ON / OFF button
Auto mode
Sound-active mode
Pause
Time mode
page 7 / 32
Description
Built-in auto programs
Sound-active mode
Text mode
Time mode
Description
Turns laser on/off
Laser runs in auto mode. Red LED indicator lights. Press the number
buttons for the following design packs: 1-Christmas, 2-Love, 3-Bir-
thday, 4-Dance, 5-Halloween, 6-Music, 7-Wall patterns, 8-Square
patterns, 9-Flat line pattern, 0-New Year countdown
Sound-active mode. Blue LED indicator flashes when sound is
detected. Sound-active mode displays the same design packs as
auto mode, but respnds to sounds. Press and hold to enable sound
sensitivity adjustment. Use 1 (least sensitive) to 9 (most sensitive)
Pauses the program. Press again to continue the program
Press to enter the time mode. Red and blue LED indicator blinks.
Press again to cycle through year, month, date, time.
Sound-active mode
ON / OFF button
Pauses the effect
Time mode
Mirror effect