Device Connections & Setting Options; Operation; Power Supply; Switch On / Off - Laserworld Ecoline Série Mode D'emploi

Manual: Ecoline Series EL-200G KeyTEX
6. Device connection & setting options
Mode Button
Microphone
IR Receiver
Emission LED
Adjust Pattern
Size
Power in

7. Operation

7.1 Power supply

Connect your EL-200G KeyTEX with the external PSU and connect it to the mains. Please make
sure that you are using the correct voltage. False voltages could destroy the device. Please use
the voltage specified at the end of this manual. Don't focus the front of the laser on people
while installation.

7.2 Switch on / off

Insert the key into the key switch on the back side of the laser and switch to "On" to switch
the device on or to "Off" to switch the device off. Please disconnect the device from the power
supply if you don't need it for a longer period.
page 6 / 32
Laser Aperture
Keyboard Interface Fan
Key Switch
Interlock