CST/BERGER LASERMARK Wizard LM30 Manuel D'instructions page 4

Thank you for purchasing the LaserMark® Wizard LM30 Rotary
Laser. Please read this manual thoroughly before operation.
EN
The information contained herein is proprietary information of
CST/berger, and is subject to change without notice.
FEATURES (Fig. 1)
1. Laser Emitting Window (Plumb Beam)
3. "Y" Level Vial
5. "Y" Leveling Screw & Plumb Vial Leveling Screw
7. Plumb Vial
9. Laser Emitting Window (Level Beam)
11. Battery Door Screw
13. Base with two 5/8" - 11 Mounting Thread
CONTROL BUTTON OPERATION (Fig.2
1. POWER/CONTROL BUTTON - LEDs indicate operation mode
2. PRESS CONTROL BUTTON ONE TIME to turn unit on; rotation begins in
FAST" Speed (approx. 600 RPM).
3. PRESS TWO TIMES for "SLOW" Speed (approx. 150 RPM).
4. PRESS THREE TIMES to "STOP" rotary head (laser remains lit).
5. Press FOUR TIMES to use Long Sweep
6. Press FIVE TIMES to use Short Sweep
7. Low Battery Indication Light
8. Remote Control Window
PRESS CONTROL BUTTON SIX TIMES to turn unit off (no LED's remain lit and
the laser is OFF).
4 • LM30 Rotary Laser
2. Rotary Head
4. "X" Level Vial
6. "X" Leveling Screw
8. Control Button
10. Trivet
12. Battery Door
)