CONTINENTAL EDISON CERTT91W8 Guide D'utilisation page 50

4. When installing your refrigerator, it is important to consider the climate class
of the product. To find out which climate class your refrigerator belongs to,
please check the nameplate: the refrigeration unit is operating correctly in
the ambient temperature range indicated on the table, depending on the
climate class.
Class
Extended temperate
temperate
subtropical
tropical
5. Before connecting the unit to the power supply, let it rest for about two
hours. This will reduce the risk of malfunction in the cooling system due to
handling during transport. Operate your product about 2 to 3 hours before
adding food.
CAUTION: To avoid a hazard caused by instability of the unit, it must be installed
and secured in accordance with the instructions in the installation instructions.
6. Electrical connection
a) Check that the voltage values of the power supply can withstand those
indicated on the nameplate placed in the refrigerator. The electrical
installation must comply with the requirements of standard NF C 15-100.
If the outlet is not equipped with a grounding plug, or if the plug is not
indicated for your network, we advise you to contact a specialized
electrician.
Do not use adapters or diverters to prevent overheating and burning.
If the appliance is not equipped with an electrical socket, it must be
connected to the mains by means of a switch that will be connected
directly to the power supply terminals. This switch must guarantee a
unipolar disconnection of the device with contact separation of not less
than 3 mm.
Symbol
SN
N
ST
T
EN-17
Average ambient
temperature °C
from + 10 to + 32
from + 16 to + 32
from + 10 to + 38
from + 10 to + 43