Accessories; Electric Shock Hazard - Danby DPA080C2SDB Guide D'utilisation Et D'entretien

Identifying Parts
FEATURES

ACCESSORIES

ELECTRIC SHOCK HAZARD: To avoid the possibility of
personal injury, disconnect power to the unit before installing or
servicing.
Installation Accessories:
• Flexible exhaust hose
• Exhaust nozzle connector (3 pcs) (Connector A, B and C)
• Window door slider kit (3 pcs)
• Screws (5 pcs)
• Pipe Clip
• Pipe Hoop (2)
• Drainage Pipe
• Rubber Plug
• Adhesive foam (2)
• Non-adhesive foam (4)
NOTE: The exhaust / window kit must be installed at all times
when the unit is operating under AIR CONDITIONING mode.
There should be at least 11.8" (30cm) clearance between the
unit and any other objects or building structures, and the unit
should be installed on a level fl oor. The unit does not have
to be vented outside during dehumidifying or fan only mode
operation. When the unit is in dehumidifying mode, the warm
air exhaust must be vented inside the room.
1
4
2
3
1. Control Panel
2. Air outlet
5
3. Caster
6
4. Remote Control Holder
7
5. Power Cord
6. Air Filter
8
7. Upper Air Inlet Grill
8. Lower Air Inlet Grill
Exhaust
Connector A
Window Slider
Kit
Pipe Clip
Pipe Hoop
(2)
Rubber
Plug
• Ensure that all the accessories are included in the
package and refer to the installation instructions for
their usage.
Note: All the illustrations in this manual are for ex-
planatory purposes only. Your air conditioner may be
slightly different.
5
Exhaust Exhaust
Connector B Connector C
Exhaust Screw
Hose (5)
Drainage Pipe
Foam (adhesive and
non-adhesive) (6)