Danby DPA080C2SDB Guide D'utilisation Et D'entretien page 13

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Features
ELECTRONIC CONTROL
INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panel and remote control and all its functions. Select the
functions you desire based on the associated symbol.
The unit can be controlled by the control panel alone or with the remote control.
Power Switch: Turns the unit ON/OFF.
Mode: Allows you to scroll through and select desired operating mode.
Temperature Adjust: Used for adjusting the thermostat. The default display is set temperature. In cooling
mode, when
only adjustable in cool mode.
LED Display
MODE INDICATOR LIGHTS
Cooling Mode: When cool mode is selected, the indicator light will illuminate. During the cooling mode, the air
is cooled and hot air is exhausted outside through the exhaust tube. Adjust the fan speed to suit your desired
comfort level.
Note: The air exchange hose must vent outside the room when using cool mode.
Dehumidify Mode: When dehumidify mode is selected, the indicator light will illuminate. Air is dehumidifi ed as
it passes through the unit, without being in full cooling mode.
Note: The warm air exchange hose must be vented outside the room when using dehumidifying mode.
Fan Mode: When fan mode is selected, the indicator light will illuminate.
Full Water Tank Indicator Light: Illuminates when the water tank is full.
or
button is pressed, the set temperature is displayed and may be adjusted. Temperature is
9

Publicité

Table des Matières
loading

Table des Matières