brennenstuhl MULTI 360 12050 MH Mode D'emploi page 12

Operating instructions
OPERATIONS
Position the floodlight and switch it on with the switch.
Standing: Place the floodlight on a dry, level surface.
Hanging: Hang the floodlight from a suitable pipe.
To compensate for different battery weights, the suspension hook can be moved (Fig. 1g - 1i).
CHARGING THE RECHARGEABLE BATTERY
Only use one of the manufacturer's original charging device: Bosch, Dewalt, Festool, Flex,
Makita, Metabo (CAS), Milwaukee.
TRIPOD MOUNTING
The floodlight can also be mounted or hung on a Brennenstuhl stand, either individually
or in pairs (Fig. 3a - 3d).
If two floodlights are mounted, the accessory crossbar "CB 70 1172640059" is required.
SCOPE OF DELIVERY
Article 1173700003: Floodlight, 6 multi adapters: Bosch, Festool, Flex, Makita, Metabo,
Milwaukee/Dewalt, Adapter bag.
Article 1173702003: Floodlight
ACCESSORIES
Suitable accessories are available on our homepage www.brennenstuhl.com.
CLEANING
Disconnect the product from the mains voltage and remove the battery before cleaning.
Do not use solvents, caustic cleaning agents or similar products.
Only use a dry or slightly moistened cloth for cleaning.
MAINTENANCE
ATTENTION: The LED lamp does not contain components that require maintenance.
The light source of this lamp cannot be replaced. If the light source has reached the end of
its service life, the entire lamp has to be replaced. The lamp may not be opened.
EU DECLARATION OF CONFORMITY
UK DECLARATION OF CONFORMITY
The declaration of conformity is deposited with the manufacturer.
12
012422 BA_MULTI 360 12050_12052 0533874.indd 12 012422 BA_MULTI 360 12050_12052 0533874.indd 12
MULTI 360 12050 MH / 12052 MH
30.05.22 13:52 30.05.22 13:52