ARTHUR MARTIN AWY 61013WI Notice D'utilisation page 12

12
CAUTION! Before you close
the lid of your appliance, make
sure that you close the drum
correctly.
Using detergent and additives
Measure out the detergent and the fabric
conditioner.
Detergent compartments
Detergent compartment for
washing phase.
Compartment for liquid addi‐
tives (fabric conditioner, starch).
Setting a programme
1. Turn the programme knob and set the
programme:
• The indicator of the button Départ/
Pause flashes.
2. If necessary, change the spin speed or
add available options. When you
activate an option, the indicator of the
set option comes on.
If you set something incorrect,
the indicator of button Départ/
Pause flashes red.
Starting a programme without
the delay start
Press the button Départ/Pause .
• The indicator of this button stops to
flash and stays on.
CAUTION! Do
not exceed the
MAX level.
• The programme starts, the lid locks,
the indicator of the current cycle
phase is on.
• The drain pump can operate for a
short time at the beginning of the
washing cycle.
Starting a programme with the
delay start
1. Press the button Départ différé to set
the hours of delay you want to set.
The indicator of the set delay is on.
2. Press the button Départ/Pause:
• The appliance starts the
countdown.
• When the countdown is completed,
the programme starts automatically.
You can cancel or change the
set of the delay start before you
press the button Départ/Pause.
To cancel the delay start:
1. Press the button Départ/Pause to set
the appliance to pause.
2. Press Départ différé until the indicator
of the set delay goes off.
Press Départ/Pause again to start the
programme immediately.
Interrupting a programme and
changing the options
You can change only some options before
they operate.
1. Press the button Départ/Pause . The
indicator flashes.
2. Change the options.
3. Press the button Départ/Pause again.
The programme continues.
Cancelling a running
programme
1. Turn the programme knob to position
to cancel the programme and to
deactivate the appliance.
2. Turn the programme knob again to
activate the appliance. Now, you can
set a new washing programme.