Spypoint LINK-MICRO-S-LTE Guide De Démarrage Rapide page 13

STARTING YOUR CAMERA
1. Turn ON the camera.
2. The green STATUS light will flash while searching for a signal
(can take a few minutes).
3. The STATUS light will light up in one of the following 3 colors:
Red: Insufficient signal
Orange: Acceptable signal
Green: Optimal signal
4. When the top right light flashes red, 30 seconds remain
before the photo mode is turned ON. This allows you to leave
the area without being photographed.
5. The camera is ready for use when all the lights turn OFF.
6. If the light is red during step 3, you should:
• Turn your camera OFF and then back ON.
• Retry while pointing the antenna at different angles.
• Try moving it to a spot with better signal.
• Try our #CA 01 long range cellular antenna (sold separately),
which could help improve signal strength.
INSTALLING YOUR CAMERA
1. Mount the camera using the installation strap.
2. The camera should be at the same height as the animal's
mid-body.
3. The targeted animal should be at 25 feet (7.5 meters) away
from the camera.
4. To produce brighter photos at night, there sould be items
reflecting the camera's flash in the background.
13