Chicco Sirio 012 Mode D'emploi page 24

must never be used without the fabric cover.
• Check that the safety harness strap is not
twisted to avoid that the strap or any parts
of the child car seat remain trapped between
the car doors, or rub against cutting edges.
If the safety harness is cut or frayed, it must
be replaced.
• Do not transport loose or unsecured objects
or baggage on the back shelf of the vehicle:
they may injure the passengers in case of ac-
cident or sudden braking.
• Ensure that all car passengers fasten their
seat belts, for their own safety and also be-
cause, during the journey, they may injure
the child in the event of an accident or the
sudden braking of the car.
• On long journeys make frequent stops. Chil-
dren get tired easily. Do not remove the child
from the child car seat while travelling. If your
child needs attention, find a safe place and
stop.
• In the first few months after birth, children
may have difficulty breathing in a seated po-
sition. Avoid leaving children to sleep in the
seat until they can lift their heads themselves.
• Premature babies born before the 37th week
of pregnancy may be at risk if placed in a
child car seat. These newborn babies may
have breathing difficulties when seated in
the child car seat. We recommend consult-
ing your doctor, or the hospital's staff, for
their medical opinion on whether your child
can be transported in the child car seat when
leaving the hospital.
CONTENTS:
1. DESCRIPTION OF THE PARTS
2. PRODUCT FEATURES
3. RESTRICTIONS AND REQUIREMENTS RE-
GARDING THE USE OF THE PRODUCT AND
CAR SEAT
4. HOW TO FIT THE GROUP 0+ (FROM 0 UP TO
13 kg) CHILD CAR SEAT TO THE CAR
5. HOW TO FIT THE GROUP 1 (9-18 kg) CHILD
CAR SEAT TO THE CAR WITH THE ISOFIX
SYSTEM
6. HOW TO FIT THE GROUP 1 (9-18 kg) CHILD
CAR SEAT TO THE CAR WITH A 3-POINT SEAT
BELT
7. HOW TO FIT THE GROUP 2 (15-25 kg) CHILD
CAR SEAT TO THE CAR WITH A 3-POINT SEAT
BELT and TOP TETHER
8. HOW TO FIT THE GROUP 2 (15-25 kg) CHILD
CAR SEAT TO THE CAR WITH A 3-POINT SEAT
BELT
9. ADJUSTING THE INCLINATION
10. ADJUSTING THE HEIGHT OF THE BELTS
AND THE HEADREST
11. ADJUSTING THE CHILD CAR SEAT BUCKLE
12. REMOVING 5-POINT SEAT BELTS
13. SEATING THE CHILD IN THE CHILD CAR
SEAT
14. CLEANING AND MAINTENANCE
1. DESCRIPTION OF THE PARTS
Fig. 1 (Front of child car seat)
A. Headrest height and belt adjustment but-
ton
B. Diagonal red belt guide for installation in
Gr. 2
C. Shoulder straps
D. Car seat belts
E. Mini-booster cushion (0-9 kg)
F. Belt adjustment button
G. Belt adjustment strap
H. Seat inclination adjustment lever
I. Padded leg divider
J. Belt fastening/unfastening buckle
Fig. 2 (Child car seat side view)
K. Installation labels
L. Red clamp
M. Abdominal red belt guide for installation in
Gr. 1 and Gr. 2
N. Blue belt guide for installation in Gr. 0+
O. Red belt-guide for installation in Gr. 2 (par-
agraph 8)
P. Isofix connectors
Q. Isofix connector release buttons
Fig. 3 (Back of child car seat)
R. Isofix connector removal belt
S. Top Tether cover
T. Top Tether
U. Top Tether hook
V. Top Tether adjustment button
W. Tightness indicator
X. Homologation label
24