Extent Of Warranty; Processing Of Warranty Claims; Service; Label Meanings - Parkside PSH 3 A1 Instructions D'utilisation Et Consignes De Sécurité

Warranty terms / Service / Label meanings

Extent of warranty

The appliance has been manufactured to strict
quality guidelines and meticulously examined be-
fore delivery.
The warranty applies to defects in material or man-
ufacture. This warranty does not apply to product
parts subject to normal wear and tear and which
can therefore be considered as wear items, or to
damage to fragile parts, e.g. switches, storage bat-
teries or glass parts.
This warranty becomes void if the device has been
damaged or improperly used or maintained. All in-
structions provided in the instructions for use must be
followed strictly to constitute proper use of the prod-
uct. Purposes and practices which the operating in-
structions warn of or advise against must be avoided
without fail.
This product is intended for private, non-commercial
use only. Any incorrect or improper use of the device,
use of force and changes not performed by our au-
thorized service branch will void the warranty.

Processing of warranty claims

Please follow the instructions below to ensure your
claim is processed quickly:
When inquiring about your product please have
your receipt and product number (e.g. IAN) ready
as your proof of purchase.
The product number can be found on the type plate,
an engraving, the cover page of your instructions
(bottom left) or the decal at the back or bottom.
In the event of malfunctions or other defects, please
first contact the service department below by phone
or e-mail.
A product recorded as defective, along with the
proof of purchase (sales receipt) and a description
of the defect and when it occurred, can then be re-
turned free of charge to you to the service address
provided.
26 GB
270752_Schweisshelm Automatik PSH 3 A1_content_FR.indd 26
Note: On www.lidl-service.com you can
download this as well as many other
manuals, product videos and software.

Service

Only use original accessory parts:
Viewing pane 109.6 mm x 89.5 mm
(Art. No.: 1910)
Viewing pane 114.5 mm x 86.7 mm
(Art. No.: 1911 / 1912)
Rear pane 102.4 mm x 46.2 mm.
How to contact us:
GB
Name: C. M. C. GmbH
Website: www.cmc-creative.de
E-mail: service.gb@cmc-creative.de
Phone: 0-808-189-0652
(standard German landline
rates apply)
Registered office: Germany
IAN 270752
Please note that the following address is not a service
address.
Please first contact the service point named above.
Address:
C. M. C. GmbH
Katharina-Loth-Str. 15
66386 St. Ingbert
Germany

Label meanings

Safety viewing panels approved accord-
ing to DIN EN 166: CMC 1 F CE
(Legend: CMC = manufacturer code, 1 = optical
class, F = low power shock, CE = CE symbol)
19.01.16 17:24