Prebena AEROTAINER 240 Mode D'emploi page 71

Cleaning the air filter
Effective cleaning of absorbing air is one of the most important conditions for long compressor life.
WARNING!
Compressor damage due to ingress foreign objects into the suction hole.
The compressor must not be running without the air filter.
Do not blow the suction hole using the air gun. Foreign objects can come into the hole.
VIGON 120, VIGON 240, VIGON 300 and PREMO 400
To clean the air filter, proceed as follows:
PIONEER 282, PIONEER 342, TWINSTAR 450 and TWINSTAR 690
To clean the air filter, proceed as follows:
ORKAN 215
To clean the air filter, proceed as follows:
Turn the cover (1) of air filter counter-clockwise. The cover is
unlocked.
Remove the cover (1) from the air filter casing (2).
Remove the filter bush (3) and clean it using an air gun. If nec-
essary, replace the filter bush.
Insert the filter bush (3).
Put the cover (1) on the air filter casing (2).
Block the cover by turning it clockwise.
Unscrew the cover (1) from the cylinder head (2).
Remove the filter bush and clean it using an air gun. If neces-
sary, replace the filter bush.
Insert the filter bush.
Screw the cover (1) on the cylinder head (2).
Open the cover (1) of air filter. The cover is unlocked.
Remove the filter bush and clean it using an air gun. If neces-
sary, replace the filter bush.
Insert the filter bush.
Block the cover.
Maintenance of compressor
33