Pairing" (Connecting A Surveillance Camera To The Indoor Unit) - Conrad 75 42 70 Notice D'emploi

"PAIRING" (Connecting a Surveillance Camera to the Indoor Unit)

If you want to connect other surveillance cameras in addition to the included one to the indoor unit of this
set ("Pairing"), ensure that each of these devices uses another channel than the surveillance camera(s)
already installed. The indoor unit can be used to operate up to four surveillance cameras.
When "PAIRING" is highlighted, push the "MENU" button (6) once to start pairing between the surveil-
lance camera and the indoor unit.
Then push the pairing button at the end of the camera cable. It is on the connection piece to the plug-in
mains adapter.
Pairing key
The pair LED on the surveillance camera will flash once. Continuous flashing of the LED signals that
data transmission is underway.
The system confirms successful connection between surveillance camera and indoor unit by displaying
the word "PAIRED" on the indoor unit.
If connection between surveillance camera and indoor unit fails, the system shows the screen message
"PAIRING FAIL".
Push the button "ESC" (8) to leave the menu.
64