Best Placement Of Cameras, Indoor Unit And Monitor - Conrad 75 42 70 Notice D'emploi

• If a mains adapter is damaged, do not touch it. Danger to life from electric shock!
• First switch off the mains voltage for the mains socket to which the mains adapter is con-
nected (e.g. switch off the corresponding circuit breaker or turn out the fuse, switch off the
associated FI protection switch so that the mains socket is separated from the mains vol-
tage on all poles). Then unplug the mains adapter from the mains socket. Dispose of the
damaged mains adapter in an environmentally compatible way. Do not use it anymore.
Replace it with a new mains adapter of the same specifications.
• There is a danger of explosion when the battery is inserted into the infrared remote control
improperly. The included battery must only be replaced by a battery of the same type or an
equal product. Never subject the devices to high temperatures.
• The product is only suitable for use in temperate, not tropical, climates.
• In commercial institutions, the accident prevention regulations of the Employer's Liability
Insurance Association for Electrical Systems and Operating Materials are to be observed.
• Do not leave packaging material unattended. It may become a dangerous toy for children.
• Handle the product with care. It can be damaged by impact, blows or when dropped even
from a low height.
6. Best Placement of Cameras, Indoor Unit and
Monitor
Indoor unit
(DVR/Monitor)
Surveillance
camera 1
Max. 5 m
The distance between surveillance camera and power supply should not
exceed the length of the surveillance camera mains adapter cable. Do not use
any extension.
In an open environment without obstacles, such as walls, the radio signal of the surveillance
camera has a range of up to 150 metres.
Entrance door
TV/Monitor
Max. 5 m
Surveillance
camera 2
Wall hole with 15 mm diameter to
insert camera cable and plug into the
indoor area.
53