Recorder Setup" (Video Recorder Setup); Record Schedule" (Recording Schedule) - Conrad 75 42 70 Notice D'emploi

c) "RECORDER SETUP" (Video Recorder Setup)
Use the arrows (4), (5), (3) and (7) to select the function "REC" and push the "MENU"
button (6) again to get to the submenu of the "RECORDER SETUP".

"RECORD SCHEDULE" (Recording Schedule)

Use the arrows (4), (5), (3) and (7) to select the time for starting a video recording. Push
the "MENU" (6) button to change the settings of the recording schedule.
You may choose between three different recording versions. Select the time for start of the video recor-
ding first and then push the "MENU" button (6) once or repeatedly to switch through the recording op-
tions:
M: "MOTION" (recording is only started when the system registers movement)
S: "SCHEDULE" (planned continuous recording)
C: "MANUAL" (manual recording)
In all three modes the system will record videos from all four surveillance camera channels at once. For
the first one of the four channels, audio can be recorded as well. An audio channel is available in QUAD
mode (by default, channel 1 or the next available channel with a connected and coupled surveillance
camera (pairing) is pre-set), in single channel full-screen mode or "MOTION" mode (motion detection).
In "MOTION" mode, sound recording is activated automatically once the system registers a moving
object.
66