Pan Tilt Zoom - Conrad 75 42 70 Notice D'emploi

g) PAN TILT ZOOM" (pan, tilt or zoom the picture section displayed on
the screen)
Pus the "MENU" button (5) and use the arrows
select the function "PAN TILT ZOOM" and push the "MENU" button (6) again to get to the submenu "PAN
TILT ZOOM".
The surveillance camera as such cannot be panned. The function "PAN TILT ZOOM" only
changes the picture section displayed on the indoor unit.
Push the "MENU" button (6) again in "PAN TILT ZOOM" mode to activate the second zoom stage for the
picture of the selected monitoring camera. Push the arrows
tedly to then adjust the displayed section to the left, right, up or down in small steps.
Push the MENU (6) button again to zoom out again.
In zoom level 1, use the arrows
ra channels.
Push the "ESC" button (8) to terminate the "ZOOM" mode.
82
(4),
(3) and (7) to switch between the individual surveillance came-
(5), (3) and (7) in the main menu to
(4), (5), (3) and (7) repea-