Installation; Notes; Position Of The Surveillance Camera; Night-View Function - Conrad 75 42 70 Notice D'emploi

7. Installation

a) Notes
• Never subject the devices and the battery of the infrared remote control to high temperatures. Do not
install the indoor unit close to radiators.
• Indoor unit and plug-in mains adapters must only be operated in dry rooms.
• The surveillance camera may be operated in an outdoor area as well. It must not be operated in or
under water, however.
• Also avoid direct sunlight on the surveillance camera.
• Avoid vibrations.
• Install the surveillance camera and indoor unit in a well-ventilated environment.
• The surveillance camera and indoor unit must not be opened.
• The included 2 GB MicroSD memory card can be replaced by a microSDHC memory card with a capa-
city of up to 32 GB on demand.
b) Position of the Surveillance Camera
Do not point the surveillance camera(s) directly at the son or at trees, bushes and branches that move in
the wind and may trigger video recording unintentionally via the motion detection.
The system offers a "masking" function that permits excluding certain areas of the image recorded by the
surveillance camera from motion detection.
c) Night-View Function
The surveillance camera has integrated infrared LEDs and permits night-time monitoring. The infrared
LEDs are switched on automatically in the dark. The image of the indoor unit then switches from colour
to black and white. The range of the IR-LEDs is 5 - 8 m.
d) Installation of the Surveillance Camera(s)
Screw the included aerial to the back of the surveillance camera and align it as vertically upward as pos-
sible for best connection quality.
Check whether there are any power or water lines in the wall where you want to install the
surveillance camera to avoid damage when drilling the required holes.
54