Télécharger Imprimer la page

EQUATION RH03A-P EQ Notice De Montage - Utilisation - Entretien page 45

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly quali ed persons in order to avoid a hazard.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal
cutout, this appliance must not be supplied through an external switching device, such as
a timer, or connected to a circuit that is regularly switched on and o by the utility.
WARNING: In order to avoid overheating, do not cover the heater.
The heater must not be located immediately below a socket-outlet.
Fixed heaters likely to be used in a bathroom are to be installed so that switches and
other controls cannot be touched by a person in the bath or shower.
Your appliance shall be used only in xed position and shall be installed at least at
1.8m from the ground.
Regarding the instruction for installation and cleaning & maintenance, please refer to
page 48-58. Means for disconnection having a contact separation in all poles must be
incorporated in the xed wiring in accordance with the wiring rules
WARNING: This heater is not equipped with a device to control the room temperature.
Do not use this heater in small rooms when they are occupied by persons not capable of
leaving the room on their own, unless constant supervision is provided
Warning: this product shall be installed in the outside zone of the bathroom (please
refer to page 52), only according the national wiring rules (For France NF C 15-100)
We suggest that you to contact a professional electrician for assistance.
ADDITIONAL SAFETY REQUIREMENTS FOR RADIANT HEATERS
Do not use this heater with programmer, timer separate remote-control system or any
other device that switches the heater on automatically, since a re risk exists if the heater
is covered or positioned incorrectly.
WARNING : Never install the heater close to curtains and other combustible materials.
3. INSTALLATION
Warning : Always disconnect the mains supply before installing the heater.
Attention : Connect the three conductors of the supply cable to a connection box in
respecting the following polarities:
Live: brown
Neutral: blue
Earth: green/yellow
FR
ES
PT
IT
EL
PL
UA
RO
EN
45

Publicité

loading