SATA jet 4600 B Mode D'emploi page 115

Operating Manual SATAjet 4600 B RP/HVLP
Malfunction
Spray gun leaks from
the fluid tip ("fluid tip
aperture")
11. Disposal
Dispose of completely emptied spray gun as a recyclable product. To
prevent damage to the environment, dispose of residual spray medium
properly and separately from the spray gun itself. Comply with local regu-
lations!
12. After Sale Service
Please ask your SATA dealer for accessories, spare parts and technical
support.
13. Warranty / Liability
The SATA General Conditions of Sale and Delivery and further contrac-
tual agreements, if applicable, as well as the valid legislation at the time
apply.
SATA cannot be held responsible especially in the following
cases:
• When the operating instructions are disregarded
• When the product is used in other than the intended ways of usage.
• When untrained staff is employed.
• When no personal protection equipment is worn
• When no original accessories and spare parts are used.
• When the product is manipulated, tampered with or technically modi-
fied.
• In case of normal wear and tear.
• In case when the product has been exposed to untypical shockloads
and impacts during usage.
• Assembly and disassembly
Cause
Contamination be-
tween paint needle tip
and fluid tip
Damaged nozzle set
Corrective action
Clean fluid tip and
paint needle, observe
chapter 8
Replace nozzle set,
chapter 9
US
115