Ibiza Light LAS-S130RG-BAT Manuel D'utilisation page 33

LED on the charger is red. When the battery is fully charged, the LED
lights green. This takes about 8 hours. The unit can run 2-3 hours on a
fully charged battery. Set the switch (7) to ON. Select AUTO or MUSIC
controlled mode via the switch (4). If you select music controlled mode,
you can adjust the motor rotation via the control (3).
For strobe mode, set the switch (7) to position 1. Stroboflash and adjust
the flash rate via the rotary control knob (6).
Set the switch (7) to OFF when you don't use the laser anymore.
Front and rear panel of the unit
1. MIC
2. Laser aperture
3. Motor controller
4. Music controlled / auto run
5. Cooling fan
6. Flash speed control of the strobe
7. Switch: 1. Stroboflash 2. ON 3. OFF
8. Power input jack
This mini stage light projects thousands of small green and red dots on
walls and ceilings that flicker and move to the sound of the music.
Specifications
Adapter Power supply IN: ............................. 220-240VAC∼50/60Hz
Built-in battery .................................................... Lithium 4.2V, 2A
Laser diode .......................................................... Red and Green
Direct output laser power ................ Red: 100mW Green: 30mW
Power of reflected mobile beams ...................................... ≤ 1mW
Control mode ............ Sound control, Auto control, strobe control,
.............. the external potentiometer can adjust sound sensitivity,
........................................... strobe speed, grating rotation speed.
Dimensions ....................................................... 120 x 92 x 52mm
Net weight ......................................................................... 0.37kg
© Copyright LOTRONIC 2015 LAS-S130RG-BAT 4