EWT XTREM Manuel D'utilisation page 13

DE
The
SPECIFICATIONS
user
Model
cing EAN code
Power
ified
LED screen
LED indicators
Mode
k of
Remote control
Oscillation
use
Tilt
state Timer
Product dimensions (WxDxH) W30.9 x D24.1 x H34.1 cm
Product weight
r of
INTRUCTIONS OF USE
all
BEFORE USING THE APPLIANCE FOR THE FIRST TIME:
larly
hese 1. Please read these instructions carefully before using the
appliance and keep them for future use.
ople,
2. Check that the voltage of your local electricity network
complies with the one which appears on the appliance.
3. Before using the appliance for the first time, remove
k of
the appliance's protective films, sticker or any other
advertising item.
from
dren The appliance can be controlled using the control panel
(Figure 1) or the remote control.
t be
Make sure that the appliance is on a stable and flat surface
duct
before using it.
Plug the AC/DC jack adaptor into the DC power input socket
(7) located at the back of the appliance. Then plug the
into
power cable into an electrical power socket.
any Once the appliance has been plugged in, ''00'' will appear on
the LED display screen.
e by
n an
ed or
over
et.
Appliance On/Off
Press the
will be set to 3 by default.
Speed control
Press the
level selected will appear on the LED display screen: Speed
1 to Speed 6.
The speed level will also be indicated by the blue LED lights
(2).
Xtrem_A5.indd 13 Xtrem_A5.indd 13
3 046 171 904 775
Yes – touch control
Night silent Mode
Yes – CR2025 battery
Yes – 90° Automatic
Yes – Automatic
button to switch the appliance on. The speed
button to adjust ventilation speed. The speed
The appliance is fitted with ULTIMAIR technology, a
bladeless innovation using a premium motor. This
XTREM
technology facilitates a design which makes the appliance
easy to clean and maintain, as well as providing risk-free
26 W use.
Yes Horizontal oscillation
Press the button to switch on horizontal oscillation.
Press the button again to switch horizontal oscillation
off.
Horizontal oscillation can be activated to operate at the
8H same time as vertical oscillation.
Vertical oscillation
3.2 kg
Press the button to switch on vertical oscillation. Press
the button again to switch off vertical oscillation.
Vertical oscillation can be activated to operate at the same
time as horizontal oscillation.
Timer
Press the button to set the appliance to switch off after a
certain period of time. The timer can be set for a time period
of between 1 and 8 hours at one-hour intervals.
Note: Once you have finished setting the appliance, the LED
display will go into standby mode after a period of 10 to 20
seconds.
REMOTE CONTROL
Night Mode
Press the button to set the appliance to Night Mode. The
letters ''LL'' will appear on the LED screen.
The appliance will automatically be set to speed 1, allowing
you to enjoy efficient and silent ventilation.
If the horizontal and vertical oscillation modes are activated
they will remain so when Night Mode is activated.
FR EN DE
A. Vertical oscillation
B. Appliance On/Off
C. Timer
D. Horizontal oscillation
E. Night mode
F. Increase speed
G. Decrease speed
13
25/11/19 11:32 25/11/19 11:32