Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8. Using the 15/16" socket, screw in the 5/8 hex bolt until all the rotational clearance in the CL TS head
is taken up and the large head pin is bearing against the shank. Then turn an additional 1/4 to 1/2
turn.
(Bottom View)
9. Place a conical toothed washer onto a 3/4" hex bolt and then insert it through the slot in the channel.
All Products limited to Vehicle Tow Rating; see Vehicle Owners Manual. April 06, 2017
See
www.huskytow.com
for Warranty Information/Tech Support. © (2017) DTS. Mfg.
9
Page
5/8" hex bolt
5/8" hex jam nut
Conical tooth washer.
3/4" hex bolt
Publicité
Table des Matières
