Husky 32215 Instructions D'assemblage, D'installation, De Fonctionnement Et D'entretien page 11

12. Put a conical tooth washer on the top 3/4" hex bolt followed by a 3/4" nylon lock nut. Put a 3/4" flat
washer on the bottom 3/4" hex bolt followed by a 3/4" nylon lock nut. Torque the 3/4" nylon lock nuts
to 380 ft-lbs.
3/4" nylon lock nut
13. Insert a spring bar with the rating stamp facing up into the trunnion. Secure with the "D" retaining pin.
BE SURE THAT THE "D" RETAINING PIN GOES THROUGH HOLE IN THE SPRING BAR.
"D" retaining pin
All Products limited to Vehicle Tow Rating; see Vehicle Owners Manual. April 06, 2017
See www.huskytow.com
3/4" flat washer
for Warranty Information/Tech Support. © (2017) DTS. Mfg.
Page
11
Spring bar