Husky 32215 Instructions D'assemblage, D'installation, De Fonctionnement Et D'entretien page 19

26. Raise the trailer tongue sufficient to ease the force required to lift the spring bar ends off of the lift
brackets. Place the lift tool on the round peg on the forward side of the lift bracket and under the end
of the spring bar as shown. And start pushing down on the lift tool.
27. Continue pushing down on the lift tool until it starts to come up and towards you. IMPORTANT: Do
not be in a rush here, stay in control of the tool.
28. There will be a point where the spring bar will stop and come to a rest on top of the 2 round pins on
the lift bracket. Stop there and keep your hands away from the spring bar.
All Products limited to Vehicle Tow Rating; see Vehicle Owners Manual. April 06, 2017
See www.huskytow.com
Looking from the rearward
side of the frame bracket.
Looking from the rearward
side of the frame bracket.
for Warranty Information/Tech Support. © (2017) DTS. Mfg.
19
Page