EFFEKTIV 1700X Manuel De L'utilisateur page 14

MALFUNCTIONS AND TROUBLESHOOTING
MALFUNCTION CAUSE
The machine doesn't
Low pressure from the
feed fabric. presser foot on the fabric
Needles break 1. The needle is bent or
the needlepoint is dull
2. The needle is placed
incorrectly
3. Forcefully pulling the
fabric while sewing
Thread break 1. Thread incorrectly
threaded
2. Thread is tangled
3. Thread tension is too
tight
4. Needle placed incor-
rectly
5. Poorly chosen needle
EN 26
EN
SOLLUTION
Increase the pressure
of the presser foot on
the fabric by turning the
adjusting screw
1. Change the needle
2. Correctly insert the
needle into the clamp
3. While sewing, carefully
guide the fabric with
both hands.
1. Feed the machine
properly
2. Check the spool of
thread, thread guide
stand, etc. and remove
the tangled threads.
3. Adjust the thread ten-
sion
4. Correctly insert the
needle into the clamp
5. Use the recommended
needles
USER MANUAL
Stitch skips 1. The needle is bent or
the point of the needle
is dull
2. Incorrectly placed
needle
3. Poorly chosen needle
4. Thread is not threaded
correctly
5. Low pressure of the
presser foot on the
fabric
Uneven(poor) stitches Poor thread tension
Jammed fabric 1. Thread tension is too
tight
2. The thread is not
threaded correctly or is
tangled
ROLLED AND NARROW HEM
Rolled and narrow hemming seams are ideal for
sewing delicate fabrics such as Crepe Georgette,
Crepe de Chine, silk, etc.
1. Raise the presser foot.
2. Remove the left needle.
TRIUMPHATOR 1700X / 1800X
1. Change needle
2. Properly insert the
needle into the clamp
3. Use the recommended
needles
4. Feed the machine
properly
5. Turn the adjusting
screw clockwise to in-
crease the presser foot
pressure on the fabric.
Adjust the thread tension
1. Decrease the thread
tension when sewing
light and fine fabrics.
2. Remove any tangled
threads and thread the
machine correctly
27