Sub-Stream1; Sub-Stream2 - gigamedia GGM KITIPNVR Manuel D'utilisation

EN

10.4. Sub-stream1

10.5. Sub-stream2

28
All the setup here is for network transfer.
1) CH: All DVR channels.
2) Enable: Place a check mark « √ »
which means use sub-stream for
network transfer.
3) Resolution : QCIF/CIF
4) Frame rate:
PAL system: 1 to 25;
NTSC system: 1 to 30.
5) Quality: Normal / Good / Better / Best
6) Copy : For ease, setup one channel
and then copy to the others.
Attention : Click « Apply » after setup.
All the setup here is for network transfer.
1) CH: All DVR channels.
2) Enable: Place a check mark « √ »
which means use sub-stream for
network transfer.
3) Resolution : QCIF/CIF
4) Frame rate:
PAL system: 1 to 25;
NTSC system: 1 to 30.
5) Quality: Normal / Good / Better / Best
6) Copy : For ease, setup one channel
and then copy to the others.
Attention : Click « Apply » after setup.
Note : Sub-stream2 is mainly used for
the intelligently switch of substream
by the Viewcam of mobile phone or
Pad.
www.gigamedia.net