Manually Add The Ipc; Interface Introduction; Basic Record Setup - gigamedia GGM KITIPNVR Manuel D'utilisation

4.3. Manually add the IPC

5. Interface Introduction

In live view, « » means normal recording, «

6. Basic Record Setup

Login to the Main Menu, click « Basic », and then click « Record », as displayed below:
www.gigamedia.net
»means alarm recording, «
1) Add device: Add the IP address,
media port, user name, password
and protocol of the device by the de-
vice edit function of the NVR remote
management interface. If the device
is from our company, do not need to
fill in with user name and password.
2) Live view: View the relevant channel
after adding successfully of the de-
vice.
» means not recording.
1) CH : Order of the DVR channel.
2) Enable: Click to enable the basic
setting
3) Audio: Click to enable audio recording
4) Mode: Click « Always » or « Time re-
cording » to make the DVR record
when start up or recording accor-
ding to the set schedule.
5) Copy CH: Copy one CH setting to
another CH.
EN
23