Symbols On The Product - Husqvarna 128LX Manuel D'utilisation

Symbols on the product

WARNING! Be careful and use the product
correctly. This product can cause serious
injury or death to the operator or others.
Read the operator's manual carefully and
make sure that you understand the
instructions before use.
Use approved hearing protection. Use
approved eye protection.
Use approved protective gloves during
operation and maintenance. Use protective
boots or shoes with non-slip soles. Use
clothing of strong fabric and of full length.
Make sure that long hair is put above your
shoulders.
The product can cause objects to eject,
which can cause injury.
Maximum speed of the output shaft.
Keep a minimum distance of 15 m / 50 ft. to
persons and animals during operation of the
product.
Risk of blade thrust if the cutting equipment
touches an object that it does not
immediately cut. The product can cut off
body parts. Keep a minimum of 15 m / 50 ft.
distance to persons and animals during
operation of the product.
The arrows shows the limit for the handle
position.
EMISSION CONTROL LABEL ABBREVIATIONS
General
ECS Emission control system ECM
EXH/EVP Exhaust and Evapora-
tive
HRS Hours
REGS Regulations
4
yyyywwxxxx
Note: Other symbols/decals on the product refer to
certification requirements for other commercial areas.
EPA III
The Emissions Compliance Period referred to on the
Emission Compliance label indicates the number of
operating hours for which the engine has been shown to
meet Federal and California emissions requirements.
Exhaust emission control systems
Engine control module
(Autotune)
EM Engine modification
OC Oxidizing Catalyst
TWC Three way catalyst
Air purge bulb.
Choke.
The rating plate shows the serial
number. yyyy is the production year
and ww is the production week.
EMISSION CONTROL INFORMATION
THIS ENGINE MEETS EXH AND EVP EMISSIONS REGULATIONS
FOR SMALL OFF ROAD ENGINES
FAMILY/DISP
PLT # SKU #
EMISSION COMPLIANCE PERIOD
SN:
REFER TO OWNER' S MANUAL FOR
MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.
Evaporative emission control sys-
tems
C
N
P
S
Coextruded (Multilayer)
Nylon
Treated HDPE or PE
Sealed
1570 - 001 - 14.10.2020