Symbols On The Product - Husqvarna 430LS Manuel D'utilisation

7. Stop switch
8. Throttle lockout
9. Throttle trigger
10. Spark plug cap and spark plug
11. Cylinder cover
12. Starter rope handle
13. Fuel tank
14. Air purge bulb
15. Choke control
16. Air filter cover
17. Combination wrench
18. Locking pin
19. Operator's manual

Symbols on the product

WARNING! This product can be
dangerous! Careless or incorrect use can
result in serious or fatal injury to the
operator or others. It is extremely
important that you read and understand
the contents of the operator's manual.
Please read the operator's manual
carefully and make sure you understand
the instructions before the product is
used.
Use approved hearing protection and
approved eye protection.
Maximum speed of the output shaft.
Use approved protective gloves.
Use heavy-duty slip-resistant boots.
The product can cause objects to eject,
which can cause injury.
Keep a minimum distance of 15 m to
persons and animals during operation of
the product.
1738 - 001 - 26.10.2021
Risk of blade thrust if the cutting
equipment touches an object that it does
not immediately cut. The product can cut
off body parts. Keep a minimum of 15 m
distance to persons and animals during
operation of the product.
The arrows show the limit for the handle
position.
yyyywwxxxx
EPA III
The Emissions Compliance Period referred to on the
Emission Compliance label indicates the number of
operating hours for which the engine has been shown to
meet Federal emissions requirements.
California Proposition 65
WARNING!
The engine exhaust from this
product contains chemicals known
to the State of California to cause
cancer, birth defects or other
reproductive harm.
The rating plate shows the
serial number. yyyy is the
production year, ww is the
production week.
3