Motostar MP100 Manuel D'installation page 9

INSTALLING
⚠ Only skilled, qualifi ed staff must install this product.
Preliminary checks
⚠ Before beginning the installation, do the following:
• Make sure that, the gate structure is sturdy enough, that the hinges work effi ciently and that there is no friction between the
fi xed and moving parts;
• make sure you have fi tted opening and closing mechanical gate stops;
• check that the fastening points of the motors and devices are protected from
impact shocks and that the surfaces are solid enough.
• set up suitable tubes and conduits for the electric cables to
pass through, making sure they are protected from
any mechanical damage.
• Make sure the gate is fi tted with an
electric lock to ensure reliable closing and
intruder protection.