Motostar MP100 Manuel D'installation page 20

ELECTRICAL CONNECTIONS
Connect all wires and cables in
compliance with the law while using
suitable cable glands, as shown in
the drawing.
Use a cable gland for the 230 V AC
⚠
power supply cable and one for the
gearmotor.
Power supply
230 V AC - 50/60 Hz
L N M1 N1 ENC1 EB1 V1
POWER SUPPLY
230V AC
M2 N2 ENC2 EB2 V2 10 11 E
GEARMOTOR ACCESSORIES
Output for accessories power supply at 24 V DC
(normally) - max. 50 W.
If the power is out, you can power up the 24 V DC

accessories by using buffer batteries.