Motostar MP100 Manuel D'installation page 25

PROGRAMMING
Description of programming commands
Display
The ESC button is for:
- exiting menus;
- cancelling changes.
 To enter the menu, keep the ENTER button pressed
for at least one second.
8 8 8
8 8 8
The < > keys are for:
- moving from one item to another;
- increasing or decreasing values.
 To exit the menu, wait 10 seconds or press ESC.
1"
The ENTER key is for:
- entering menus;
- confi rming or memorizing set values.
8 8 8
10"
8 8 8