Manufacturer Declaration - Beko ÖWAMAT 12 Instructions De Montage Et De Service

Masquer les pouces Voir aussi pour ÖWAMAT 12:

Instructions de montage et de service (40 pages)

Mode d'emploi (32 pages)

Table Des Matières

Table des Matières

BEKO TECHNOLOGIES GMBH

41468 Neuss, GERMANY

Phone: +49 2131 988-0

www.beko-technologies.de

We herewith declare that the products named below conform to the applicable directives and technical

standards. This declaration applies exclusively to the products as delivered. It does not cover components

added at a later stage or modifications made after delivery.

We herewith declare that the products named below and as delivered by us conform to the applicable

directives and technical standards. The products meet the requirements of the building inspectorate approval

of the German Institute for Structural Engineering DIBt.

Product designation:

Type designation:

Drawing numbers:

Approval number:

Approval body:

The products are manufactured at a factory certified according to the German Water Resources Act WHG

(formerly § 19 l WHG).

The internal production control required for the above approvals is ensured by our quality management

system certified according to ISO 9001.

Neuss, 17/12/2012

ÖWAMAT

12, 14, 15, 16