Publicité
Les langues disponibles
Les langues disponibles
Cabinet and Cutout Dimensions
Countertop opening and clearance
dimensions that are shown must be
used. Given dimensions provide required
clearances.
Mobile home installation: The
installation of this cooktop must conform
to the Manufactured Home Construction
and Safety Standards, Title 24 CFR, Part
3280 (formerly the Federal Standard for
Mobile Home Construction and Safety;
Title 24 HUD part 280); or when such
standard is not applicable, the Standard
for Manufactured Home Installations
(Manufactured Home Sites, Communities
and Setups), ANSI A225.1 — latest
edition*, or with local codes.
notch to be equal
both sides.
7-1/4"
(18.4 cm)
E
CORNER NOTCH
DETAIL
size
model
36" (91.4 cm)
KGCP462K
KGCP463K
KGCP467J
48" (121.9 cm)
KGCP482K
KGCP483K
KGCP484K
KGCP487J
Note: Dimension "B" can be reduced by 6" (15.2 cm) when bottom of wood or metal cabinet is protected by not less than 0.25" (6.4 mm) flame retardant
millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.
4
In Canada, the installation of this cooktop
must conform with the current standards
CAN/CSA-Z240 — latest edition**, or with
local codes.
The cooktop is designed to hang from the
countertop by its side and rear flanges.
The gas and electric supply should be
located as shown in "Gas and Electric
Dimensions," Page 5, so that they are
accessible without requiring removal of
the cooktop.
18" (45.7 cm) min.
clearance upper
cabinet to countertop
D
see corner
(56.5 cm)
notch detail
2"
(5.1 cm)
A
island trim
backguard
5"
1-3/4"
(12.7 cm)
(4.4 cm)
6"
1-3/4"
(15.2 cm)
(4.4 cm)
5"
(12.7 cm)
6" (15.2 cm)
5"
5"
(12.7 cm)
(12.7 cm)
13" (33 cm) max.
upper cabinet depth
3/4" (1.9 cm)
22-1/4"
6-7/8" (16.1 cm)
4-3/4"
(12.1 cm)
D
E
B (min.)
island trim
backguard
48" (121.9 cm)
49" (124.5 cm)
48"
49"
(121.9 cm)
(124.5 cm)
48"
(121.9 cm)
48" (121.9 cm)
Provide cutout in left rear corner of cutout
enclosure as shown to provide clearance
for gas inlet, power supply cord, and to
allow the rating label to be visible.
Copies of the standards listed may be
obtained from:
* National Fire Protection Association
One Batterymarch Park
Quincy, Massachusetts 02269
** CSA International
8501 East Pleasant Valley Rd.
Cleveland, Ohio 44131-5575
C
C
A
12-5/16" (31.3 cm)
min. clearance to
side wall -
both sides
C
D
backguard
cabinet and
opening
countertop
36"
35-1/4"
(91.4 cm)
(89.5 cm)
48"
47-1/4"
(121.9 cm)
(120.0 cm)
B
min.
24"
(61 cm)
base cabinet
E
countertop only
36" (91.4 cm) or
35-7/8" (91.1 cm)
for zero clearance fit
48" (121.9 cm) or
47-7/8" (121.6 cm)
for zero clearance fit
Publicité
