Fonction
Plage
Résolution
4 nF
1 pF
40 nF
10 pF
400 nF
100 pF
Capacité
4 µF
1 nF
40 µF
10 nF
200 µF
100 nF
4 kHz
1 Hz
40 kHz
10 Hz
Fréquence
400 kHz
100 Hz
4 MHz
1 kHz
Température
-40°C
1°C
~+200°C
+200°C
~+1200°C
Générateur Signal MOS complémentaire, 13 niveaux de
de signaux frequence de 1 Hz à 10 kHz, 3 V max.
Trois niveaux logiques
Logic
<80 Ω
•)))
Continuité sonore
Courant de test
1,5 mA
Tension de mesure 2,0 VDC max.
Plage de test
0 bis 1000
hFE
Courant de base
ca. 1000 µA
Vce (Uce)
2,8 V DC max.
Attention !
Ne dépassez en aucun cas les grandeurs d'entrées maximales. Ne touchez pas
aux circuits et aux parties des circuits si ceux-ci sont susceptibles de présen-
ter des tension supérieures à 25 V ACrms ou 35 V DC. Danger de mort !
82
Précision
Résistance
d'entrée/
protection de surcharg
± (2,0% + 5dgt)
<25Vrms / 30 VDC
± (5,0% + 5dgt)
± (0,1% + 1dgt)
250 Vrms
± (3,0% + 5dgt)
<25Vrms / 30 VDC
± (3,0% + 2dgt)
<25Vrms / 30 VDC
Lo = 0 à 30%
--- = 31 à 69%
250 Vrms
Hi = 70 à 100%
250 Vrms
250 Vrms
Non protégé
par un
fucible !
• Measuring frequencies up to 4 MHz,
• Testing hFE transistors for NPN and PNP types,
• Emitting C-MOS- signals in the range of from 1 Hz to 10 KHz,
• Evaluating logic levels,
• Measuring capacitances up to 200 µF
• Measuring temperatures of from –40 °C to 1,200 °C (using a suitable K type ther-
mosensor)
• Measuring direct currents and alternating currents in 3 ranges of from 0 to 400 µA,
0 to 400 mA, and 0 to 20 A.
Do not operate the measuring instrument in an open condition, with the battery com-
partment opened , and with the battery compartment lid missing. It is inadmissible to
make measurements in damp rooms or the outdoor area or under infavourable
ambient conditions.
Infavourable ambient conditions are:
- Moisture or high humidity of air,
- Dust and combustible gases, vapours or solvents,
- Heavy vibrations,
- Strong magnetic fields, e.g. in the vicinity of machines and loudspeakers,
- Thunderstorms or thunderstorm conditions such as electrostatic fields, etc.,
Any use other than the one described above damages the measuring instrument.
Moreover, this involves dangers, such as e.g. short-circuit, burns, electric shocks,
etc. No part of the product may be modified or rebuilt.
Observe the safety instructions and technical data.
Product description
The digital Multimeter (hereinafter called DMM) has a contrasty 3 3 /4 digit multifun-
ctional display with two small sub-displays and an integrated bar display. In addition,
the display indicates all measuring ranges, signs, and specific functions.
The individual measuring ranges are selected via a rotary switch in which the "Auto-
Range" automatic range selection is active. The respective measuring range which
applies is always adjusted here.
More extra functions are:
• "MIN/MAX" for retaining the minimum and maximum value measured,
• "HOLD" for "freezing" values measured,,
• "REL" for performing a reference value measurement,
• "MEM" , an integrated measured-data memory for a maximum of 10 values mea-
sured,
31