Manitowoc RN0408A Mode D'emploi page 22

Maintenance
Step 13 Move the compressor rocker switch to the OFF
position and disconnect power.
Step 14 Drain the evaporator/reservoir and reinsert the
drain hose into the hose clip.
Step 15 Reinstall the ice compression nozzle and
reservoir cover. Verify the ice tube is in place and does
not contact the condenser fan blade.
Step 16 Turn on the ice making water supply,
reconnect power and move the compressor rocker
switch to ON.
Step 17 Allow the ice machine to run for 10 minutes,
then place the compressor rocker switch in the OFF
position, disconnect power and discard all ice produced.
!
To prevent injury disconnect main supply power to
the dispenser (when used) before cleaning or
sanitizing.
22
Warning
Step 18 Clean and sanitize the bin/dispenser:
• Disconnect power to the dispenser to prevent injury.
• Use the cleaner and sanitizer ratios from the charts
on Page 21.
• Heavy accumulations of scale may require removal
of components for cleaning and sanitizing.
• Rinse parts with clear water after cleaning - do not
rinse parts after sanitizing.
• Spray all interior bin/dispenser surfaces with sanitizer
(do not rinse sanitized areas).
Step 19 Place the compressor rocker switch in the ON
position, reinstall all removed panels and restore power
to the ice machine and dispenser.
Section 4
Part Number 000007282 4/10