IV ) OPTIONS
Câble service lourd
Câble spécial pour applications intensives.
Par exemple: Charge proche de la capacité
nominal, cycles répétitifs sur des même distances
de travail, ou câble exposé à des chocs. Le câble
spécial
est
de
indépendante) l'âme est revêtue de plastique
Exemple d'utilisation
Pont papeterie
Utilisation grappin
Ponts de déchargement aciérie
Pont industrie automobile (emboutissage,
presse, etc.)
Le câble spécial doit être commander en option
« câble service lourd » code RR09.
Note : le câble IWRC est std pour les mouflages
6/1, 8/1, 12/2 et 16/2
Câble Inox
Câble inox AISI 316 6x36 IWR, âme fibre
Les charges minimum à la rupture sont :
D6: 20kN, D8: 36kN, D11: 68kN, D15: 126kN.
Note : la charge maximum est 0.5x la charge
nominal standard quand un câble inox est utilisé.
Code RR08
VERLINDE se réserve le droit de modifier sans préavis les caractéristiques de son matériel
VERLINDE reserves the right to alter or amend the above information without notice
type
IWRC(câble
à
GUIDE TECHNIQUE MECANISME.
MACHINERY HOIST TECHNICAL GUIDE
IV ) OPTIONS
Heavy duty rope
Special rope for the heavy applications.
For example if loads are near the nominal load and
load cycle is repeating the same route. Or rope is
exposed to load shocks . The special rope is IWRC
type (independent wire rope core). The core is
âme
plastic coated.
Using examples
Paper reel handling cranes
Grab use
Unloading cranes in steel warehouses
Cranes in automotive industry (stamping
plants, die handling etc)
The special rope shall be ordered as additional
feature "Heavy duty rope" (technical code RR09).
Note: IWRC rope is standard rope type in 6/1, 8/1,
12/2 and 16/2 falls rope reevings.
Stainless steel rope
AISI 316 stainless steel rope 6x36 IWR, fibre core.
Minimum breaking loads are :
D6: 20kN, D8: 36 kN, D11: 68 kN, D15: 126 kN.
NOTE: Maximum load is 0.5 x standard nominal
load when stainless steel rope is used.
Page 34
Code RR08
0 6/2008 VESAFR/GBVT1234