Cleaning And Care - Klarstein VAPOAIR OPAL SMART Mode D'emploi

Troubleshooting connection problems
If your Klarstein device cannot be found in the WLAN, check the following:
• Is the device plugged in?
• Is the WiFi feature of my phone enabled?
• Is the WiFi function of the Klarstein device activated? (Follow the instructions in the
app)
• Has the WLAN password been entered correctly?
• Are the router, Klarstein device and smartphone in the immediate vicinity during the
connection attempt? (Ideally no more than 5 m apart)
• If you have deactivated the 2.4 GHz band in the settings of your wireless router,
activate it in your router settings.
Note: For further help, follow the instructions in the app when setting up the
connection.Cleaning and Care
Note: Always switch off and unplug the unit before cleaning.
• Use cold boiled water or distilled water.
• Clean the transducer, water tank and basin unit every week.
• Change the water in water tank more often to keep it fresh.
• Make sure to pull out the water from the water tank and dry the water basin before
you store the unit unused for a long period of time.
• Clean the whole unit and make sure that all parts of the unit are dried completely
before unused for longer period of time.
How to clean the transducer:
• Put 5-10 drops of cleaning abluent on the surface of the transducer, wait for 2-5
minutes.
• Brush off the scale from the surface.
• Rinse the transducer with clean water.
• Never use sharp or solid objects for cleaning the transducer.
How to clean the Basin unit:
• Clean the water basin with soft cloth .if there is excess film on the surfaces, then
soak the cloth with vinegar and repeat the process.
• If there is a film in any of the depressions along the basin ,drop a bit of vinegar into
depression and clean it out with a brush.
• Rinse the water basin with clean water.
How to clean the Ceramic Filter System:
• Clean and activate the ceramic balls after use of 1000 L water regularly.
• Remove the filter from the tank cover.
EN
27