Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Changing the water::
1. Turn the device off and disconnect the power cord.
2. Take the water tank out of the unit.
3. Open the water tank cover.
4. Fill the tank with clear water.
5. Close the cover, and put the tank onto the base unit carefully.
6. Put the nozzle into the socket on top of the water tank.
7. Connect the main supply, switch on the unit.
In case when the water is hard which means water contains too much calcium and magnesium, they can cause
"white powder" problem and give heavy scales on the surface of water basin, transducer and inner surface of the
water tank. Scales on the surface of transducer will make it impossible for the unit to work properly.
We recommend:
• Use cold boiled water or distilled water.
• Clean the transducer, water tank and basin unit every week.
• Change the water in water tank more often to keep it fresh.
• Make sure to pull out the water from the water tank and dry the water basin before you store the unit
unused for a long period of time.
• Clean the whole unit, and make sure that all parts of the unit are dried completely before unused for longer
period of time.
How to clean the transducer
1. Put 5-10 drops of cleaning abluent on the surface of the transducer, wait for 2-5 minutes;
2. Brush out the scale on the surface.
3. Rinse the transducer with clean water.
How to clean the basin unit
1. Clean the water basin with soft cloth and the cleaning agent if there is scale in it.
2. If the scale is covered on the security switch, drop the cleaning agent on the scale and clean it out with
the brush.
3. Rinsing the water basin with clean water.
Cleaning of the filter
Method A:
1. Clean and activate the ceramic balls after use for 1000 litres of water.
2. Take the filter system away from the tank cover.
15

Cleaning and Care

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

10028742

Table des Matières