Cleaning And Care - Klarstein VAPOAIR OPAL Mode D'emploi

• Room with piano: 40-60%RH
• Museum, exhibition hall, and library: 40-60%RH

CLEANING AND CARE

Note: Always switch off and unplug the unit before cleaning.
• Use cold boiled water or distilled water.
• Clean the transducer, water tank and basin unit every week.
• Change the water in water tank more often to keep it fresh.
• Make sure to pull out the water from the water tank and dry the water basin before
you store the unit unused for a long period of time.
• Clean the whole unit and make sure that all parts of the unit are dried completely
before unused for longer period of time.
How to clean the transducer:
• Put 5-10 drops of cleaning abluent on the surface of the transducer, wait for 2-5
minutes.
• Brush off the scale from the surface.
• Rinse the transducer with clean water.
• Never use sharp or solid objects for cleaning the transducer
How to clean the Basin unit:
• Clean the water basin with soft cloth .if there is excess film on the surfaces, then
soak the cloth with vinegar and repeat the process.
• If there is a film in any of the depressions along the basin ,drop a bit of vinegar into
depression and clean it out with a brush.
• Rinse the water basin with clean water.
EN
23