Publicité
Les langues disponibles
Les langues disponibles
Angle Grinder
Art. No.
Rated voltage
Rated speed
Grinding disc diameter, max.
Thread of grinder spindle
Thread length (max.) of grinder spindle
Weight according to EPTA-Procedure 01/2003
Permitted ambient temperature
– during charging
*
– during operation
and during storage
Recommended batteries
Recommended chargers
* Limited performance at temperatures <0 °C
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-3.
Typically the A-weighted noise levels of the product are:
Sound pressure level 82 dB(A); Sound power level 93 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 60745:
Surface grinding: a
=6.0 m/s
h
Disk sanding: a
=2.5 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for differ-
ent applications, with different accessories or insertion tools or
is poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
All manuals and user guides at all-guides.com
Tool Specifications
2
2
, K=1.5 m/s
,
2
2
, K=1.5 m/s
.
EWS 18-A
0700 235 X
V=
-1
min
mm
mm
kg
°C
°C
–20...+50
0700 916 5..
0700 816
EC-Declaration of Conformity
We declare under our sole responsibility that the product
described under "Tool Specifications" is in conformity with all
relevant provisions of the directives 2011/65/EU,
2014/30/EU, 2006/42/EC including their amendments
and complies with the following standards: EN 60745-1,
EN 60745-2-3.
Technical file (2006/42/EC) at:
Adolf Würth GmbH & Co.KG, PFW,
Reinhold-Würth-Straße 12–17
74653 Künzelsau, Germany
M. Strobel
Head of Product
Management
Künzelsau: 16.05.2014
Battery Charging
Use only the battery chargers listed on the
accessories page. Only these battery chargers are
matched to the lithium-ion battery of your power tool.
Note: The battery supplied is partially charged. To ensure
full capacity of the battery, completely charge the battery in
the battery charger before using your power tool for the first
time.
0700 236 X
18
10000
115
M 14
22
2.3
0...+45
0700 916 5..
Dr.-Ing. S. Beichter
Head of Quality,
Authorized Signatory
EWS 18-A
18
10000
125
M 14
22
2.3
0...+45
–20...+50
0700 816
23
Publicité
