Publicité
Les langues disponibles
Les langues disponibles
9009689
11. Only use an accessory that exceeds the No Load Speed rating (see
Specifications).
12. Never point the tool towards yourself.
KICKBACK PRECAUTIONS
Kickback is a sudden reaction to a pinched or snagged cutting accessory caught
on the material. The material can be ejected and inflict a serious injury on the
user or a bystander. Kickback can also damage the tool or workpiece.
Kickback can be avoided by taking proper precautions:
1.
Maintain a firm grip on the material and position your body and arms to
allow you to resist a kickback. Kickback can propel the material in the
direction of the cutting accessory's rotation.
a.
Position the workpiece so the sanding belt is pulling the workpiece
away from you, against the work table or work guard.
b.
The sanding disc rotates counter clockwise. Only sand on the left side
of the wheel as the downward force will help to maintain control of
the workpiece. Using the right side may flip the workpiece upward and
cause an injury if control is lost.
2.
Use special care when working on corners, sharp edges or flexible
material. These workpieces have a tendency to snag the cutting accessory.
3.
Only use cutting accessories designed for the tool.
VIBRATION PRECAUTIONS
1.
This tool vibrates during use. Repeated or long-term exposure to vibration
may cause temporary or permanent physical injury, particularly to the
hands, arms and shoulders.
2.
Anyone using vibrating tools regularly or for an extended period should
first be examined by a doctor and then have regular medical check-ups to
ensure medical problems are not being caused by or worsened from
tool use.
3.
If you feel any medical symptoms related to vibrations (such as tingling,
numbness, and white or blue fingers), seek medical attention as soon
as possible.
8
6 in 1/2HP Belt Sander
For technical questions call 1-800-665-8685
V1.0
Publicité
