Power Fist 9009689 Manuel De L'utilisateur page 18

9009689
Problem(s)
Workpiece is pulled
out of your hands.
Workpiece is
kicking back.
18
6 in 1/2HP Belt Sander
Possible Cause(s)
1. Workpiece is not
supported.
2. Workpiece is too small.
Sanding on wrong side of
sanding disc.
Suggested Solution(s)
1. Use the work guard or work
table to support the workpiece.
2. Hold workpiece with jip or
grasping tool. Also ensure
using work table and mitre
gauge for support.
Sand on the left side of the disc.
See Kickback Precautions.
For technical questions call 1-800-665-8685
V1.0