Télécharger Imprimer la page

Power Fist 9009689 Manuel De L'utilisateur page 5

Publicité

Les langues disponibles

Les langues disponibles

V1.0
1.
Disconnect tool from power source before cleaning, servicing, changing
parts/accessories or when not in use.
2.
Protect yourself against electric shocks when working on electrical
equipment. Avoid body contact with grounded surfaces. There is an
increased chance of electrical shock if your body is grounded.
3.
Do not expose the tool to rain or wet conditions. Water entering a power tool
will increase the risk of electric shock.
4.
Do not disconnect the power cord in place of using the ON/OFF switch on the
tool. This will prevent an accidental startup when the power cord is plugged into
the power supply.
a.
In the event of a power failure, turn off the machine as soon as the
power is interrupted. The possibility of accidental injury could occur if
the power returns and the unit is not switched off.
5.
Do not alter any parts of the tool or accessories. All parts and accessories
are designed with built-in safety features that may be compromised if
altered.
6.
Make certain the power source conforms to requirements of your
equipment (see Specifications).
7.
When wiring an electrically driven device, follow all electrical and safety
codes, as well as the most recent Canadian Electrical Code (CE) and
Canadian Centre for Occupational Health and Safety (CCOHS).
8.
Grounded tools must be plugged into an outlet that is properly installed
and grounded in accordance with all codes and ordinances. Check with a
qualified electrician if you are in doubt as to whether the outlet is properly
grounded. If the tool should electronically malfunction or break down,
grounding provides a low resistance path to carry electricity away from the
user.
a.
Never remove the grounding prong or modify the plug in any way, as
this will render the tool unsafe.
b.
Do not use any adapter plugs.
9.
This device is only for use on 120 V (single phase) and is equipped with a
3-prong grounded power supply cord and plug.
Visit www.princessauto.com for more information
6 in 1/2HP Belt Sander
9009689
5

Publicité

loading