Festool BP 18 Li I Notice D'utilisation D'origine page 35

Disconnecting the battery pack from
the mobile dust extractor
To disconnect the battery pack from the
mobile dust extractor, take one of the
following steps:
– Disconnect the mobile dust extractor
from the power supply
– Put the battery pack on the charger
– Connect another battery pack to the
mobile dust extractor
Connecting a mobile terminal
The battery pack can be connected to a
mobile terminal (e.g. for a software up­
date) using the Festool Work app.
► Press the capacity indicator but­
ton [1-1] until the Bluetooth
tor [1-3] flashes blue.
The battery pack is ready for connec­
tion for 60 seconds.
► Follow the instructions provided in
the Festool Work app to authorise
the secure connection.
7 Service and maintenance
► Keep the connecting contacts on the
battery pack clean.
► Keep the vent holes [1-4] on the bat­
tery pack open, as failure to do so
will limit functionality.
► If the battery pack stops working,
consult an authorised Festool cus­
tomer service agent.
(www.festool.com/service)
indica­
®
English
35