Festool BP 18 Li I Notice D'utilisation D'origine page 34

English
tain cases, this can take a few sec­
onds).
► Press the connection button on the
mobile dust extractor or on the re­
mote control once.
The LED on the retrofit receiver
module slowly flashes blue and the
mobile dust extractor is ready for
connection for 60 seconds.
► Switch on the cordless power tool.
The mobile dust extractor starts up
and the battery pack is connected
until the mobile dust extractor is
manually switched off.
If a second battery pack is con­
nected to the mobile dust ex­
tractor, the connection to the
first battery pack is lost.
34
Switching the mobile dust extractor on
and off
Once you have connected the battery
pack with the mobile dust extractor, the
mobile dust extractor will start up auto­
matically when the cordless power tool
is in use.
After the mobile dust extractor
has been switched off via the
battery pack, it will continue to
run for up to fifteen seconds.
► Press the on/off switch on the cord­
less power tool to switch on the mo­
bile dust extractor.
► Release the on/off switch on the
cordless power tool to switch off the
mobile dust extractor.