Bluetooth
®
or the battery pack is con
nected to a mobile terminal
Pulsating blue
The battery pack is ready for connection
to the mobile terminal (e.g. for a soft
ware update)
The battery pack uses
Bluetooth
®
to automatically
switch correspondingly equipped
mobile dust extractors when
used with a cordless power tool.
Connecting the battery pack to the
mobile dust extractor
The mobile dust extractor can
only be connected to one cord
less power tool at the same
time.
If a mobile dust extractor which
was initially switched on using
the battery pack is switched off
using the remote control, the
temporary connection between
the connected battery pack and
the mobile dust extractor will be
lost. The battery pack can then
be connected again.
► Activate the mobile dust extractor's
automatic mode (see the operating
manual for the mobile dust extrac
tor).
► If you have used the cordless power
tool already, ensure that the battery
pack's capacity indicator has gone
out so that you can connect it (in cer
English
33