Mosquito Magnet Liberty Plus Manuel De L'utilisateur page 4

Principal Parts
add regulator hose
Self-Contained
Liberty Plus
Regulator Hose (1)
Parts Included
Mosquito Magnet ® Octenol Biting
Quick Clear Adapter
Insect Attractant
EPA Reg. No. 72563-1 (Short-Range Attractant)
Bug Bag
5
Power Head (1)
Trumpet (1)
Support Pole (1)
Base Support (1)
Charging Adapter
Re-Chargeable Battery
Assembly Instructions
Trap Assembly:
Step 1
Place base upside down on a flat surface, unfold U-
shaped support leg until it locks in place.
Step 2
Turn base and leg assembly right-side-up and place
support pole into cavity on base.
Step 3
Place Liberty Plus power head onto pole. Press down
firmly with two hands to secure.
Assembled trap should have the front of power head/
trumpet placed farthest from the wheels in the same
direction as base U-shaped legs.
Step 4
Charge Liberty Plus for 24 hours before use.
See pg. 7 for further details.
NOTE: You will not need to charge it again until the
following season.
Bug Bag Installation:
Lift clear plastic lid and lock plastic holding bracket of bug
bag into front of compartment. Close plastic lid when finished.
Note: Fabric loops hook over plastic posts allowing bug
bag to expand to its highest capacity.
Bug bag locks into front of compartment
6