Lorex LIVE SD 4.3 Serie Mode D'emploi page 24

Press the Auto Recording button (A) on top
2
of the monitor to start Auto Recording.
When Auto Recording is enabled, an
appears on the screen.
When motion is detected, the monitor starts
recording according to the selected mode.
By default, the monitor records for the entire time
the camera is detects motion and then records
for 5 more seconds. You can increase the length
of time the monitor will record after motion stops
(see "Configuring Motion Recording Duration" on
page 26).
To stop Auto Recording, press the Auto
3
Recording button (A) again.
NOTE: If recording is taking place, the current
recording will be stopped, but Auto Recording
will still be activated. Press A again to de-activate
Auto Recording.
Auto Recording button
Auto Recording button
22
icon