Publicité
Les langues disponibles
Les langues disponibles
P/T Camera
If wall mounting:
1
Hold the included P/T mouting plate against
the wall. Use a pencil to mark 2 holes in the
wall with centers exactly 26mm apart. Drill
holes where you have marked.
If ceiling mounting:
Hold the included P/T mounting plate
against the ceiling. Use a pencil to mark the
centers of the 3 mounting slots. Drill holes
where you have marked.
NOTE: Make sure that the lone mounting
slot points toward the viewing area.
Viewing area
Lone mounting slot
Tap anchors into holes with a hammer. Insert
2
screws 2/3 of the way.
Align the slots on the mounting plate with the
3
screws and push down to lock in place.
Tighten the screws to secure the mounting
4
plate in place.
Place the camera on the mounting plate and
5
twist clockwise to lock in place.
OR
NOTE: For ceiling mounting, use the ceiling mounting
switch on the bottom of the P/T camera to flip the video
image.
94mm
Ceiling mounting
switch
8
26mm
O
O
O
Publicité
